PIX 出模拟器了 - pixemu!

A dedicated programmer, known as mmm123, in the hacki forum released source and binary files that will emulate the PIX525.

./pixemu -net nic,vlan=1,macaddr=00:aa:00:00:02:01 -net tap,vlan=1,script=if1up -net nic,vlan=2,macaddr=00:aa:00:00:02:02 -net tap,vlan=2,script=if2up -serial stdio -m 128 FLASH

[root@dynamips pixemu_public2007-04-11_bin]# ./pixemu -net nic,vlan=1,macaddr=00:aa:00:00:02:01 -net tap,vlan=1,script=if1up -net nic,vlan=2,macaddr=00:aa:00:00:02:02 -net tap,vlan=2,script=if2up -serial stdio -m 128 FLASH
Could not open '/dev/kqemu' - QEMU acceleration layer not activated
Values read from ini file::
serial=12345678 (305419896)
image="pix"
key=0,0,0,0
image file read 18374703 bytes, @100000
128MB RAM

Total NICs found: 2
i82559 Ethernet at irq 11 MAC: 00aa.0000.0201
i82559 Ethernet at irq 9 MAC: 00aa.0000.0202
BIOS Flash=am29f400b @ 0xd8000
Could not determine the file system type. Data in the flash will be lost.

Initializing flashfs...
flashfs[7]: Checking block 0... checksum (61666 != 61425)
flashfs[7]: erasing block 0...done.
flashfs[7]: Checking block 1...block number was (0)
.
.
.
flashfs[7]: flashfs fsck took 3 seconds.
flashfs[7]: Initialization complete.

Need to burn loader....
Erasing sector 0...[OK]
Burning sector 0...[OK]

INFO: Unable to read firewall mode from flash
Writing default firewall mode (single) to flash
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000

This activation key is not valid, use default settings only

--------------------------------------------------------------------------
. .
| |
||| |||
.|| ||. .|| ||.
.:||| | |||:..:||| | |||:.
C i s c o S y s t e m s
--------------------------------------------------------------------------

Cisco PIX Security Appliance Software Version 7.2(1)

Copyright (c) 1996-2006 by Cisco Systems, Inc.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Type help or '?' for a list of available commands.
pixfirewall>
pixfirewall> en
Password:
pixfirewall# sh ver

Cisco PIX Security Appliance Software Version 7.2(1)

Compiled on Wed 31-May-06 14:45 by root
System image file is "Unknown, monitor mode tftp booted image"
Config file at boot was "startup-config"

pixfirewall up 52 secs

Hardware: PIX-525, 128 MB RAM, CPU Pentium II 1 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: Ext: Ethernet0 : address is 00aa.0000.0202, irq 9
1: Ext: Ethernet1 : address is 00aa.0000.0201, irq 11
The Running Activation Key is not valid, using default settings:

Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Disabled
VPN-3DES-AES : Disabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : Unlimited

This platform has a Restricted (R) license.


需要在 Linux 的系统上玩 还不知道能不能在 cygwin 下编译 -- 作者认为希望不大
困了,明天有时间跑下虚拟机,唔,是个让人留口水的好东西哇!

2 Comments

看不懂!呵呵!不过希望你顺利过关!考试这东西这一辈子都不想去碰它了!呵呵!

win下的版本出来了

www.dynamips.cn/bbs
pemu basic区

Leave a comment

Recent Entries

  • How to remove a VMHost from SCVMM 2008 R2 forcefully

    这几天碰到个问题,有个服务器原来安装的是 2008 Server Core系统,上面跑 Hyper-V,已经将其导入 SCVMM 2008 R2 来管理。最近实在是嫌 Server Core 管理太不方便,于是想把系统换成带图形界面的,也没在 SCVMM 里面把主机删除,直接就重装了,IP和计算机名什么的都没变,结果问题来了,再打开 SCVMM 的控制台,发现这台主机联系不上(当然,因为重装的没有了 Agent),就想删掉再重加,结果删除过程报错:Error (801) VMM cannot find ISO object . Recommended...

  • Outlook Mobile Update

    现在你可通过新的Microsoft Office Outlook Mobile更新程序和 Microsoft Exchange Server 2010 来保证你手上的信息是最有价值的。 这次的 Outlook Mobile 更新仅针对 Windows Mobile 6.1 的手机。 当你的手机连接到 Exchange Server 2010 时,如果有适合的更新你会收到自动的提示。 如果你的手机的系统是 Windows Mobile...

  • 哥们,我的更新汇总在哪呢?

    我刚刚在我全新的 Exchange 2010 服务器上安装了更新汇总1 - RU1, 然后运行 Get-Exchangeserver -Identity MyExchangeServer (译者: 可以用 Get-Exchangeserver -Identity MyExchangeServer | fl ExchangeVersion, AdminDisplayVersion)得到以下关于AdminsDisplayVersion 和 ExchangeVersion 的版本信息: 嗯, 这看上去有点眼熟(译者:...

  • Exchange 2010 Update Rollup 2

    Today Microsoft released Update Rollup 2 for Microsoft Exchange Server 2010. RU2 comes 3 months after the release of RU1. The list of included fixes...

  • HMC 4.0 Update Rollup 3 has been updated

    Description of Update Rollup 3 for Hosted Messaging and Collaboration 4.0http://support.microsoft.com/kb/979702/en-usMicrosoft released an update rollup that is dated December 2009. This update fixes issues that...

Close