April 2007 Archives

./pixemu -net nic,vlan=1,macaddr=00:aa:00:00:02:01 -net tap,vlan=1,script=if1up -net nic,vlan=2,macaddr=00:aa:00:00:02:02 -net tap,vlan=2,script=if2up -serial stdio -m 128 FLASH

[root@dynamips pixemu_public2007-04-11_bin]# ./pixemu -net nic,vlan=1,macaddr=00:aa:00:00:02:01 -net tap,vlan=1,script=if1up -net nic,vlan=2,macaddr=00:aa:00:00:02:02 -net tap,vlan=2,script=if2up -serial stdio -m 128 FLASH
Could not open '/dev/kqemu' - QEMU acceleration layer not activated
Values read from ini file::
serial=12345678 (305419896)
image="pix"
key=0,0,0,0
image file read 18374703 bytes, @100000
128MB RAM

Total NICs found: 2
i82559 Ethernet at irq 11 MAC: 00aa.0000.0201
i82559 Ethernet at irq 9 MAC: 00aa.0000.0202
BIOS Flash=am29f400b @ 0xd8000
Could not determine the file system type. Data in the flash will be lost.

Initializing flashfs...
flashfs[7]: Checking block 0... checksum (61666 != 61425)
flashfs[7]: erasing block 0...done.
flashfs[7]: Checking block 1...block number was (0)
.
.
.
flashfs[7]: flashfs fsck took 3 seconds.
flashfs[7]: Initialization complete.

Need to burn loader....
Erasing sector 0...[OK]
Burning sector 0...[OK]

INFO: Unable to read firewall mode from flash
Writing default firewall mode (single) to flash
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000

This activation key is not valid, use default settings only

--------------------------------------------------------------------------
. .
| |
||| |||
.|| ||. .|| ||.
.:||| | |||:..:||| | |||:.
C i s c o S y s t e m s
--------------------------------------------------------------------------

Cisco PIX Security Appliance Software Version 7.2(1)

Copyright (c) 1996-2006 by Cisco Systems, Inc.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Type help or '?' for a list of available commands.
pixfirewall>
pixfirewall> en
Password:
pixfirewall# sh ver

Cisco PIX Security Appliance Software Version 7.2(1)

Compiled on Wed 31-May-06 14:45 by root
System image file is "Unknown, monitor mode tftp booted image"
Config file at boot was "startup-config"

pixfirewall up 52 secs

Hardware: PIX-525, 128 MB RAM, CPU Pentium II 1 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: Ext: Ethernet0 : address is 00aa.0000.0202, irq 9
1: Ext: Ethernet1 : address is 00aa.0000.0201, irq 11
The Running Activation Key is not valid, using default settings:

Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Disabled
VPN-3DES-AES : Disabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : Unlimited

This platform has a Restricted (R) license.

What's New in Microsoft Dynamics CRM "4" CTP 2 Server?
Microsoft Dynamics CRM 4 Community Technology Preview 2 includes several new enterprise-level features that offer a wide range of flexibility, scalability, and ease of use.

Multi-tenancy
Earlier versions of Microsoft Dynamics CRM Server provided a single organization solution. Microsoft Dynamics CRM 4 Community Technology Preview 2 provides the ability to host multiple organizations in a single Microsoft Dynamics CRM deployment. This feature is a great benefit for hosted solutions. Microsoft Dynamics CRM 4 Community Technology Preview 2 now implements two types of databases:
• A single configuration database that stores metadata and location information for all organizations
• One or more organization databases

Server roles
Microsoft Dynamics CRM 4 Community Technology Preview 2 introduces several new server roles that provide services, which increase flexibility and scalability. You can choose to have a computer dedicated to one server role or to all server roles.
The server roles are selected and installed during Microsoft Dynamics CRM 4 Community Technology Preview 2 Server Setup. The server roles are:
• Application Server Role: This server role provides the Microsoft Dynamics CRM 4 Community Technology Preview 2 Web user interface and services.
• Asynchronous Services Role: This server role allows you to deploy the asynchronous services, such as the Workflow and Bulk E-mail services to a separate machine.
• SQL Governor Role: This server role manages user requests during heavy loads to deliver efficient throughput and increased quality of service.

SRS Data Connector
The SRS Data Connector is a service that connects the Microsoft Dynamics CRM 4 Community Technology Preview 2 Server computer to the Microsoft SQL Report Server computer. The SRS Data Connector eliminates the Kerberos double-hop authentication that was required for Microsoft Dynamics CRM 3.0 deployments where Microsoft SQL Server Reporting Services was installed on a separate computer.
The SRS Data Connector is installed as a separate component.

Resource Center
The Resource Center provides a place within the application where users, administrators, and implementers will find information to help them use and configure Microsoft Dynamics CRM. When completed, the Resource Center will present a wide range of rich content and links to valuable resources. Much of the content in the Resource Center will be created by experts in the Microsoft Dynamics CRM community.

当然,还有预料之中的MUI的支持,上两张图瞄瞄

PS.开始准备 CRM 的认证考试了,算是5年之后重返 MS 认证考试的第一站, God bless me.