HMC4.5 is out!
Here is the link for the docs and sample code etc
Here is the link for the updated SDK doc.
Use HMC 4.5 to address several critical customer scenarios, including:
Messaging and management of e-mail messages, attachments, and business tasks. HMC 4.5 lets you extend your reach to SMB customers, small office and home office customers, and even individuals. Services can range from reliable, scalable e-mail functionality to additional storage, shared calendars and contacts, and hosting of personal domains.
Direct, multichannel communications. Using the contact information stored in Microsoft Active Directory®, Microsoft Office Communications Server 2007 manages all communications, including e-mail, instant messaging, audio, video, Web conferencing, and PC-to-PC calling. Office Communications Server 2007 enables presence, so people can determine whether others are available before contacting them in the most practical way--for example, by instant messaging, a phone call, or a video conference.
Secure, productive collaboration and sharing of digital assets. Windows SharePoint Services gives you a way to host team Web sites that can become a customer's preferred avenue for effective teamwork and content exchange.
The table below highlights the advantages of the key elements of HMC 4.5.
0 TrackBacks
Listed below are links to blogs that reference this entry: HMC4.5 is out!.
TrackBack URL for this entry: /huiying.cgi/209.
HI pOweRK6,
We are currently trying to implement a consolidated architecture of H.M.C 4.5 . Are you aware of any other party that has tried to do so ?
Would you be able to point us to existing consolidated deployment information ?
The 4.0. Guide worked almost flawlessly for 4.0... Hope there is a 4.5. guide out there too
cheers,
Mike
Hi Mike, I just come back from my vacation, so can only reply you today.
Yes, I am trying to do a consolidated arch for HMC4.5, it's a little complex than HMC4. you know, v4.5 has OCS part. I have to take some time to study&research. Anyway, if I have done, I will let you know. Randy Zhong
Hi Randy
Since HMC 4.5 is out yet i'm trying to build HMC4.0. Unfortunately when i'm about to deploy MPS, i can't find SolutionMedia\Service Provisioning\Deployment Tool\DeploymentTool.msi. So what i did was to download DeploymentTool.msi and installed on MPSSQL01. Now here is the problem, when i launched Provisioning Deployment Tool it asked me to put "Installer Files" and "Configuration/Log Files" and i have no idea where these 2 folders are.
Please help
Many thanks
km
Hi KM,
you should download a iso file from MS site, right? HMC-4.0.460.0.ISO. Use a virtual CDROM tool like Daemon Tools to mount it or use WINRAR to extract it, then you can find \Service Provisioning\DeploymentTool\DeploymentTool.msi file.
Cheers,
Randy
Dear Randy
Sorry for the late reply, I got it working....thank you so much.
Now, i have encountered another problem. When I'm trying to prepare AD for Exchange, after successfully installed PowerShell 1.0 it prompts me "Please go to the Control Panel to install and configure system components" after running the command "Setup /PrepareSchema". I wonder whether it's because my AD is running on server 2003 sp2 R2 KN.
thank you so much for your help again.
regards,
km
Km,
Win2003 AD is ok. But you need to do some Schema change. So you need to run "Setup /PrepareSchema". Did you follow the steps of the guide or HMC4 help file? After you run this command, you should wait for the changes to replicate across your Exchange organization before continuing to the next step. The amount of time this takes is dependent upon your Active Directory site topology.
After you run PrepareSchema and allow time for replication, you must run Exchange Server 2007 PrepareAD.
Procedure DWHE.3: To run PrepareAD
BR,
Randy
Hi Randy,
I did follow the steps in the guide for HMC4 help file, but i'm stucked at (Procedure DWHE.2). The problem occurs while running "Setup /PrepareSchema" in command prompt, it does nothing but prompted me a window with message "Please go to the Control Panel to install and configure system components". In other words, it didn't do any replication.
I'm doing this on my X86 WS2003 AD and haven't installed Exchange 2007 on any other server yet.
thank you for helping again. 感謝你
km
Hi km,
According to your description, your AD is running on a x86 platform, and Exchange 2007 RTM/SP1 version is running on a x64 OS, so you have 2 options:
1. Replace your AD from x86 to x64.
2. Download a 32-bit Exchange 2007, then use this 32-bit version to run PrepareSchema and PrepareAD steps.
Good Luck!
Cheers,
Randy
Hi Randy
I'm here to bother again. Thanks everything in advance!!!
when i was trying to "Add a Consumer User and Mail-Enable Them", logging on to "www.consolidatedmessenger.com/sampleprovisioningui" with "admin@consolidatedmessenger.com" as UserID, I wasn't able to create mailbox for Cindy Durkin or any user. All i can do is editing admin's information. Do you have any idea?
thanks
best regards,
km
Hi Randy
Sorry to mention that the problem i mentioned in previously occurs on MPSSQL01 but it works on FE01. I was able to create mailbox for consumer client (Cindy Durkin) on FE01.
thanks
km